J.B.Institute of Engineering & Technology

             (UGC Autonomous)
(Accredited by NAAC, Approved by AICTE
& Permanently Affiliated to JNTUH)

Department of MECHANICAL

Research and Development

Currently the staff is interested and involving in below mentioned projects which involves in R&D activities

Research Committee
To encourage research activities in the department,a commmittee is formed with people who involve in research activity. Active research is being carried out in the department in the areas of

Research culture is inculcated amongst the students through their project works. Some such projects are

Paper Publications:

2014-15

  1. M.Sandeep Kumar, D.V.S Raju, C.Udaya Kiran, “Design and stress analysis of Gas Turbine Multi-Stage Rotor Assembly”, International Journal ofInnovative Research in Technology, Vol.1,Issue.5, PP.118-122.
  2. B.Sridhar, Y VijayaKumar, C.Udaya Kiran,“Design and Analysis of Masthead for a Twin Boom Stacker”, International Journal ofInnovative Research in Technology, Vol.1, Issue.5, pp.123-127.
  3. "Mechanical characterization of hybrid composites: A review", N Kistaiah,C Udaya Kiran,G Ramachandra Reddy,M Sreenivasa Rao,Journal of Reinforced Plastics and Composites, July 2014; vol. 33, 14: pp. 1364-1372, 2014.
  4. A Paper with title “Structure, Morphology & Infrared Spectroscopic Characterization of  Ga(2x+2) N Fe2(49-x) O3   Ferrite synthesized using Sol Gel technique”, I.Rajani,C.Udaya Kiran,Bhrahmaji Rao is communicated to Journal of Nanoengineering and Nanosystems whose status is under peer review.
  5. G.Gopala Krishna, P.Ram Reddy and M.Manzoor Hussain, “Hardness and Tensile Behavior of Friction Stir Welded Aluminum AA6351 Alloy ”, Journal of Mechanical Engineering, Transaction of Mechanical Engineering Division, The Institution of Engineers, Bangladesh, June 2014, Vol. ME 44, No.1, pp.23-26.
  6. G.Gopala Krishna, P.Ram Reddy and M.Manzoor Hussain, “Mechanical Behaviour of Friction Stir Welding Joints of Aluminium Alloy of AA6351 with AA6351 and AA6351 with AA5083 ”, International Journal of Engineering Trends and Technology (IJETT), Apr. 2014, vol. 10, no. 4, pp. 168 - 172.
  7. P.H.V.Sesha Talpa Sai, Y. Vijay Kumar, C.Udayakiran, Design of Hybrid Suspension System for Automotive Applications P.Nagaraju*, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE),Volume 11, Issue 6 Ver. V (Nov- Dec. 2014), PP 17-21.
  8. B.Sandhya Rani*, P.H.V.Sesha Talpa Sai, Y. Vijay Kumar, C.Udayakiran, Structural Design and Analysis of Trailer System for Photo Voltaic Cells B.Sandhya Rani*, P.H.V.Sesha Talpa Sai, Y. Vijay Kumar, C.Udayakiran, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Volume 11, Issue 6 Ver. V (Nov- Dec. 2014), PP 22-25.
  9. 8. Sridhara Reddy, Dr.Maheswar Dutta, Dr. K.Vijaya Kumar Reddy, “Experimental investigation of spark ignition engine operating on different Hydrogen–CNG blends”, International journal of computer  applications in Engineering, technology and sciences (IJ-CA-ETS), April-Sept 2013, volume 5,  issue 2   pp. 77-85
  10. 12. Sridhara Reddy, Maheswar Dutta and K.Vijaya Kumar Reddy, “The effect of compression ratios on performance and emissions of a diesel-CNG dual fuel engine with hydrogen addition” Accepted for publication in December 2014 issue of Journal of Mechanical Engineering (ISSN: 0379-4318), The Institution of Engineers, Bangladesh (Ref: JME1407147).

2013-14

  1. I.Rajani, Dr.C.Udaya Kiran, Dr.V.Brahmaji Rao;International Conference on Smart Syatems,(ICSS- 7&8 October 2013),Joginpally Bhaskar Rao Institute of Engineering and Technology,Hyderabd, “Review on usage of III-V semi-conducting materials in Nano composites”.
  2.  I.Rajani, Dr.C.Udaya KIran, Dr.V.Brahmaji Rao; National Conference on Nanotechnology’s Invisible threat:Small science,Big Consequences ,(26-27 September-2013),Mahatma Gandhi National Institute of Research and Social Action (MGNIRSA),”Review on Usage of II-VI Semi-Conducting Nanomaterials”.
  3. Mr.N.Kistaiah,B.Srinivas,Dr.C.UdayaKiran,,Dr.M.Sreenivasa Rao, A Study On Mechanical Testings Of Hybrid Composites , Volume-1,International Conference On Emerging Trends In Mechanical Engineering, 24-25, February 2014.
  4. “Role of Good Governance in Human Development in India – Issues & Challenges” in ICSS conducted by Department of ECE and R&D, on 19st & 20th December, 2013.
  5. “Recent Trends and Future Potential of Animal Fiber Reinforced Composite Materials” in International conference on Engineering Materials and Processes (ICEMAP-2013), 23rd and 24th May-2013, conducted by Tagore Engineering College, Chennai, Tamilnadu.
  6. “Work- Life Balance of Women Entrepreneurs in India” in edited volume Titled  “Managing Human Resources in Global Era- Prospects & Challenges, ISBN: 978-81-926819-3-1, page, 158 published in  2014.
  7. Design of Air Condition & Distribution Systems, P.DivakaraRao, KrishnamRaju, V.Sreenivasulu, K.Santos, 2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  8. Design of Centrifugal Pump for Palm Fruit Pulp Handling in Palm Oil Plant, V.Sreenivasulu, P.Divakara Rao,Anoopkumar, B.D.G.N.Kumar,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  9. Reduction of Ream Packing Machine Engineering Downtime by 50% from Current Level, P.DivakaraRao, B.V.K.Murthy, V.Sreenivasulu, M.Kishore,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  10. Design of Centralized Oil Lubrication for Writing & Printing Paper Plant, P.DivakaraRao, Y.Vijaya Kumar, V.Sreenivasulu, G.V.SubbaRao,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  11. Design of Centrifugal Pump for Pulp Handling in Paper Plan, D.V.S.Raju, Y.Vijayakumar, V.Sreenivasulu, G.NageshwaraRao,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  12. Analysis of Interfacial microstructure of post weld heat treated dissimilar metal weld of type 316 LN/C-Steel Joint, K.Jitendar Reddy, Sujith Satyam, G.Gopala Krishna, Sreedhara Reddy, Proceedings of the National Conference on Advances in Merchnicala Engineering and Renewable Energy(AMERE-2013), 25-26 March 2013.
  13. Work- Life Balance of Women Entrepreneurs in India, B.Uma Rani, P.Divakara Rao,  National Seminar conducted by Department of Commerce & Management, Osmania University on “Modern Management Practices” on 1st & 2nd February, 2013.
  14. A.Prasad Babu,Y.Vijaya Kumar,Dr.C.Udaya Kiran, "Topology Optimization in Design of Engine ounting Bracket",  VOLUME-1,International conference on Emerging Trends in Mechanical Engineering, 24-25, February 2014
  15. V.Sreenivasulu, Dr. D.Maheshwar and Dr.V. Pandurangadu, Experimental Investigations and Thermal Analysis of Closed Loop Pulsating Heat Pipe, VOLUME-1,International conference on Emerging Trends in Mechanical Engineering, 24-25, February 2014
  16. Sridhara Reddy, Dr.Maheswar Dutta, Dr. K.Vijaya Kumar Reddy, “Experimental investigation of spark ignition engine operating on different Hydrogen–CNG blends”, International journal of computer  applications in Engineering, technology and sciences (IJ-CA-ETS), April-Sept 2013, volume 5,  issue 2   pp. 77-85.
  17. Sridhara Reddy, Maheswar Dutta, “Performance and Emission Characteristics of Direct Injection CNG-Diesel Dual Fuel Engine”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) Vol. 8, Issue 5 (Sep. - Oct. 2013), pp 29-37.
  18. Sridhara Reddy, MaheswarDutta and K.Vijaya Kumar Reddy, “An experimental study on the effect of exhaust gas recirculation on operating parameters of diesel-cng dual fuel engine with hydrogen addition”, International Journal of Emerging Techniologies and applications in Engineering Technology and Scxiences (IJ-ETA-ETS),  Jan ’14 – June ’14, volume 7 : Issue 1 pp 16-022.
  19. L.Sudheer, G.Gopala Krishna and Dr.C.Udaya Kiran, “Modelling and FEM analysis of Single Arm Robot”, International Journal of Innovative Technologies, Nov. 2013, vol. 01, issue 06, pp. 557-561.
  20.  G.Gopala Krishna, P.Ram Reddy and Manzoor Hussain, “Experimental Investigation of Tensile Strength and Deflection Characteristics Friction Stir Welded  Aluminum AA 6351 Alloy Joint”, Accepted for the publication in IOSR (International Organization of Scientific Journal)Journal of Mechanical and Civil Engineering (IOSR-JMCE), (The article ID : C33036 ) for the May –June 2013 issue (e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 7, Issue 1).
  21.  P.Naveen Kishore, G.Gopala Krishna, P.Diwakar Rao and V.Srinivasulu, “Torsional Vibration Analysis of Pre-Twisted Cantilever Beam using FEA”, Proceedings of the 2nd  International Conference on Advancements in Engineering and Management (ICAEM-2013), Pp. 340-344, held at Royal Institute of Technology and Science, Hyderabad,
  22. India, during 27th – 28th February 2013.
  23. Sridhara Reddy, Maheswar Dutta, “Performance and Emission Characteristics of Direct Injection CNG-Diesel Dual Fuel Engine”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) Vol. 8, Issue 5 (Sep. - Oct. 2013), pp 29-37.
  24. Sridhara Reddy, MaheswarDutta and K.Vijaya Kumar Reddy, “A Comparative Evaluation of the Performance and Emission Characteristics of Internal Combustion Engine with Compressed Natural Gas as Alternative Fuel”, International Journal of Emerging Technology and Advanced Engineering (IJETAE), Vol.3, issue 10, October 2013.
  25. Sridhara Reddy, Dr.Maheswar Dutta, Dr. K.Vijaya Kumar Reddy, “Experimental investigation of spark ignition engine operating on different Hydrogen–CNG blends”, International journal of computer  applications in Engineering, technology and sciences (IJ-CA-ETS), April-Sept 2013, volume 5,  issue 2   pp. 77-85

2012-13

  1. “Review on Recent trends in the usage of Nano materials in Nano composites and their applications”, I.Rajani, C.UdayaKiran, V.BrahamajiRao, International Conference in Materials Processing and Characterization,1, 2012.
  2. “Review on usage of SWCNT/MWCNT doped with nano ferrites in nano composites and their developing applications:”, I:Rajani , C:Udaya Kiran  , V:Brahamaji Rao , International Conference in Materials Processing and Characterization, (8-10 March 2012)
  3. I. Rajani, , V.Brahamaji Rao,            C.Udaya Kiran, ”Review on nano composite materials and their application in nano air vehicles”, International conference proceedings held at JNTU,Hyderabad. ( December- 10th -12th,2012)
  4. Modeling And Analysis Of Fork Lift, T.Glory, Y.Vijaya Kumar, V.Sreenivasulu,P.Diwakara Rao, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management,RITS,27 & 28 February 2013, 332-338.
  5. Modelling And Analysis Of 4-Stroke Petrol Engine Crank Shaft, Mohammed Faisal, Y.Vijaya Kumar, V.Sreenivasulu, P.Diwakara Rao, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management,RITS,27 & 28 February 2013, 337-339.
  6. “Introduction, Synthesis, properties and Applications of Carbon Nanotubes”, I.Rajani, C.Udaya Kiran, National Conference on “Nano-biotechnology: Emerging Trends and Applications in Microbiology” organized by Mahatma Gandhi National Institute of Research and Social Action (MGNIRSA), Hyderabad from 4th -6th February 2011.
  7. Torsional Vibration Analysis of Pre-Twisted Cantilever Beam, using FEA, P.Naveen kishore, G.Gopala krishna , P.Diwakara Rao, V.Sreenivasulu, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management,RITS,27 & 28 February 2013, 340-344.
  8. Reduce Internal Rejection In Ic Engine Vaive Using Six Sigma Method M.Manikyala Rao, V.Sreenivasulu, P.Diwakara Rao, C.Udaya Kiran, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management,RITS,27 & 28 February 2013, 345-348.
  9. Finite Element Modeling For Maximum Temperature In Friction Stir Welding And It’s Validation Samala Raju, P. Ravikanth Raju, P.Diwakara Rao, V.Sreenivasulu, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management,RITS,27 & 28 February 2013, 349-353.
  10. Finite Element Analysis Of Vibration Fixture Made Of Aluminum And Magnesium Alloys G. Phani sowjanya, P.Diwakara Rao, V.Sreenivasulu, C.Udaya Kiran, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management,RITS,27 & 28 February 2013, 354-357.
  11. Thermal Analysis Of Functionally Graded Plates Using Higher Order Theories  A. Kiran Kumar, C.Udaya Kiran, V.Sreenivasulu, P.Diwakara Rao, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management, RITS,27 & 28 February 2013, 358-364.
  12. Analysis of Composite Drive Shaft, L. Venu Varma1, P. Srinivasa Kumar, P.Diwakara Rao, V.Sreenivasulu4, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management,RITS,27 & 28 February 2013,365-369.
  13. Stress Analysis On A Crankshaft For Dynamic Load, R. Bhushana Rao , B V K Murthy , D.M.Lal, K.Jithendar Reddy, RITS ICAEM-2013: 2nd International Conference on Advancements in Engineering and Management,RITS,27 & 28 February 2013, 419-426.
  14. Design of Air Condition & Distribution Systems, P.DivakaraRao, KrishnamRaju, V.Sreenivasulu, K.Santos, 2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  15. Design of Centrifugal Pump for Palm Fruit Pulp Handling in Palm Oil Plant, V.Sreenivasulu, P.Divakara Rao,Anoopkumar, B.D.G.N.Kumar,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  16. Reduction of Ream Packing Machine Engineering Downtime by 50% from Current Level, P.DivakaraRao, B.V.K.Murthy, V.Sreenivasulu, M.Kishore,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  17. Design of Centralized Oil Lubrication for Writing & Printing Paper Plant, P.DivakaraRao, Y.Vijaya Kumar, V.Sreenivasulu, G.V.SubbaRao,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  18. Design of Centrifugal Pump for Pulp Handling in Paper Plan, D.V.S.Raju, Y.Vijayakumar, V.Sreenivasulu, G.NageshwaraRao,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.
  19. Design of . Variable Valve Actuation in I.C.Engine, P.DivakaraRao, P.RavikanthRaju, V.Sreenivasulu, P.Narasimha Reddy,  2nd International Conference on Materials Processing and Charecterization,organized by GRIET, 16-17 March 2013.GRIET-VS
  20. Finite Element Analysis of Vibration Fixture Made of Aluminum and Magnesium Alloys, G. Phani Sowjanya, P. Divakara Rao, Dr. C.Udaya Kiran,Volume 2, Issue 1, IJLTET.
  21. Modelling and Stress Analysis of Flare Piping, T.V.V.Satyanarayana, V. sreenivasulu, Dr.C.Udaya kiran,Volume 2, Issue 1, IJLTET.
  22. Centralized Oil Lubrication System, N.Ashok kumar,P.Divakara Rao, V. sreenivasulu, Dr.C.Udaya Kiran,Volume 2, Issue 1, IJLTET.
  23. Feasibility Study of Wind Energy for Vignan Hills and Design of an Effective Wind Energy Conversion System, B.Narasimhulu, V. sreenivasulu, Dr.B.Balu Naik, Volume 1, Issue 2,
  24. Performance and Emission Comparisions of a retrofitted spark Ingnition Scooter Engine filled with Gasoline and CNG, Sreedhara Reddy, Maheshwara Dutta, Proceedings of National conference on Recent Advances in Mechanical Engineering and their impact on Indian Industries (RAMEIII-2012), 20-22September-2012.
  25.  “Recent Trends and Future Potential of Natural Fiber Reinforced Composite Materials”, P.Divakara Rao, V.Sreenivasulu, C.Udaya Kiran, K.Eshwara Prasad, National conference on Recent Advances in Mechanical Engineering and their impact on Indian Industries (RAMEIII-2012), 20-22September-2012.
  26. Experimental Investigation of friction stir weldiong of aluminium 1080 Alloy joint testing for Aircraft structures, G.Gopala Krishna, M.Manzoor Hussain, P.Ramireddy and Lingamurthy, Proceedings of 1st comference on computing communications, systems and Aeromatics(ICCCSA 2012), 30-31 March 2012.
  27. Experimental Investigation of friction stir weldiong of Aluminium AA6061, All Joints testing for Aircraft structures, G.Gopala Krishna, M.Manzoor Hussain, P.Ramireddy and Lingamurthy, Proceedings of National conference on Recent Advances in Mechanical Engineering and their impact on Indian Industries (RAMEIII-2012), 20-22September-2012.
  28. Analysis of Interfacial microstructure of post weld heat treated dissimilar metal weld of type 316 LN/C-Steel Joint, K.Jitendar Reddy, Sujith Satyam, G.Gopala Krishna, Sreedhara Reddy, Proceedings of the National Conference on Advances in Merchnicala Engineering and Renewable Energy(AMERE-2013), 25-26 March 2013.
  29. ROYAL-12-VS
  30. Work- Life Balance of Women Entrepreneurs in India, B.Uma Rani, P.Divakara Rao,  National Seminar conducted by Department of Commerce & Management, Osmania University on “Modern Management Practices” on 1st & 2nd February, 2013.
  31.  Presented a paper titled “Traits of Women as Successful Entrepreneurs –An Indian Perspective”, , B.Uma Rani, P.Divakara Rao,  National Conference on Women Empowerment & Entrepreneurship conducted by Tolani College of Commerce, Mumbai on 24th November, 2012.
  32. A.Prasad Babu,Y.Vijaya Kumar,Dr.C.Udaya Kiran, "Topology Optimization in Design of Engine
  33. Mounting Bracket",  VOLUME-1,International conference on Emerging Trends in Mechanical Engineering, 24-25, February 2014
  34. V.Sreenivasulu, Dr. D.Maheshwarand Dr.V. Pandurangadu, Experimental Investigations and Thermal Analysis of Closed Loop Pulsating Heat Pipe, VOLUME-1,International conference on Emerging Trends in Mechanical Engineering, 24-25, February 2014
  35. Mr.N.Kistaiah,B.Srinivas,Dr.C.UdayaKiran,,Dr.M.Sreenivasa Rao, A STUDY ON MECHANICAL TESTINGS OF HYBRID COMPOSITES , VOLUME-1,International conference on Emerging Trends in Mechanical Engineering, 24-25, February 2014
  36. I.Rajani,Dr.C.Udaya KIran,Dr.V.Brahmaji Rao;International Conference on Smart Syatems,(ICSS- 7&8 October 2013),Joginpally Bhaskar Rao Institute of Engineering and Technology,Hyderabd, “Review on usage of III-V semi-conducting materials in Nano composites”.
  37.  I.Rajani,Dr.C.Udaya KIran,Dr.V.Brahmaji Rao; National Conference on Nanotechnology’s Invisible threat:Small science,Big Consequences ,(26-27 September-2013),Mahatma Gandhi National Institute of Research and Social Action (MGNIRSA),”Review on Usage of II-VI Semi-Conducting Nanomaterials”.